How to do waterproof on the resin tile roofing in Chengdu?

How to do waterproof on the resin tile roofing in Chengdu?


Everyone knows that the resin tile itself is also a moisture-proof decorative material. Its surface layer is high-density and does not leak water. It can not find the problem of nano-fiber penetration, and the single page occupies the floor. Under such conditions, the waterproof level can also exceed the external wall waterproof requirements of level 3.


       However, for houses with higher water-proof requirements, how can resin tiled roofs be damp-proof?
        Resin tile flat roof grade II moisture-proof usual practice: construct flat roof + mixed mortar plaster layer + ground waterproofing + insulation layer + plaster layer or cushion layer + resin tile.

      If the requirements are higher, you can make a waterproof coating on the plaster layer of the mixed mortar, add a ground waterproof between the heat insulation layer and the plaster layer or the plaster layer and the resin tile, and make the plaster layer 35mm thick fine stone The concrete is equipped with two-way steel bars, and the size is very high.

      If wood board is selected as the commonplace for the masses, the layer of sbs waterproof should be laid on the wood board mass, the total width of the anchor is 10cm, and the sbs waterproof pressure should be nailed to the wood mass with the use of the water strip. For gutters and gutters, it is better to use 1.2mm thick nano-material waterproof material or 3mm polymer asphalt concrete waterproof material. After the ground waterproof pavement is over, cover the insulation layer and its resin tiles, so that all flat roofs are protected against moisture, and the insulation and the covering of the tile panels are considered to be real.

vacuum box for PVC pipe production line
vacuum box for PVC pipe production line




PMT-The revolutionaries and leader in the plastic machinery tech. Visit us: http://en.plastic-machinery-tech.com https://t.me/PMTGlobal

Comments

Popular Posts