SJ65+TwoLayer+Paiting+Hose+Extrusion+Line for IR
 |
| SJ65+TwoLayer+Paiting+Hose+Extrusion+Line for IR |
SJ65+TwoLayer+Paiting+Hose+Extrusion+Line IR
SJ65+TwoLayer+Paiting+Hose+Extrusion+Line for IR
Specification
Hose: inner 7.8-8mm outer 11-11.3mm
Raw material: Soft PVC granules and yarn
Output: 60-85kg/h
 |
| SJ65+TwoLayer+Paiting+Hose+Extrusion+Line for IR |
Load factor: 50-80%
Overall dimension: 14*4*2.2m
Cooling water: 3m3/h circularly used
NAME
|
QNTY
|
1. SINGLE SCREW EXTRUDER: SJ65/30
|
2 SETS
|
2. DIE AND HEADER: 12.5,19,25MM (I.D)
|
4 SETS
|
3. CO-EXTRUDER
|
1 SET
|
4. COOLING BATH
|
2 SETS
|
5. DRYING TANK
|
1 SET
|
6. HAUL-OFF UNIT
|
2 SETS
|
7. WINDER
|
1 SET
|
8. ELECTRICAL CABINET
|
2 SETS
|
9.SJ25 SINGLE SCREW EXTRUDER
|
3 SET
|
10.SEALING UNIT
|
1 SET
|
Technical data
1. Single screw extruder: SJ-65×30
Screw diameter: 65mm
Screw length and diameter (L/D): 30:1
Motor: AC 15 KW driven by ABB inverter
Max. Screw speed: 78rpm
Max. Output: 40-85kg/h
Heater of barrel: 10kW
Material of screw and barrel: 38CrMoAlA nitrogen quenched;
Lower noise reducer gearbox;
Cooling way for barrel: lower noise blower.
Hopper dryer: 50L
2. Die and mould
Specification: 12.5,19,25mm (I.D)
Material: 45# steel, forged, chrome-plated surface
3. Co-extruder
Screw diameter: 25/20mm
Screw length and diameter (L/D): 20:1
Motor: AC 10 KW driven by ABB inverter
Max. Screw speed: 70rpm
Max. Output: 20-70kg/h
Heater of barrel: 10kW
Material of screw and barrel: 38CrMoAlA nitrogen quenched;
Lower noise reducer gearbox;
Cooling way for barrel: lower noise blower.
Hopper dryer: 50L
4. Cooling bath
Length: 2400mm
Tank upper section made of stainless steel.
5. Drying tank
Length: 1000mm
Heating power: 6Kw
6. Haul-off unit
Motor: AC 1.5 kW driven by ABB inverter
Haul-off speed: 0-20m/min
Structure: Twin caterpillars
Meter counter
Winder
Manual
8. Electrical unit
AC contactor and thermal overload relay: SIEMENS
9.Single screw extruder: SJ-25/25 (make the Marking Line for two line)
Screw diameter: 25mm
Screw length and diameter (L/D): 25:1
Motor: AC 2.2kW driven by ABB inverter
Max. Output: 6 kg/h
Heater of barrel: 3kW
Material of screw and barrel: 38CrMoAlA nitrogen quenched;
Lower noise reducer gearbox;
Cooling way for barrel: lower noise blower.
10.Sealing unit
Power:200W
With temprature control
minutes ten +0 wan
ReplyDelete