Brief introduction about the installation process of synthetic resin tile products

PMT-The revolutionaries and leader in the plastic machinery tech. Visit us: http://en.plastic-machinery-tech.com
Brief introduction about the installation process of synthetic resin tile products

Brief introduction about the installation process of synthetic resin tile products

Plastic Machine Technology is a professional manufacturer of synthetic resin tile equipment. For the installation and process of synthetic resin tiles, they have something to say


Brief introduction about the installation process of synthetic resin tile products
1. Optional square tube (60*40*3mm) or C-shaped steel (100*50*20*3mm) or anti-corrosion wood (60*40mm).
2, the spacing of the sandalwood is 660mm, arranged from top to bottom.


Brief introduction about the installation process of synthetic resin tile products

3. When installing the main tile, it should be installed according to the local wind direction. Reverse the tiling. The tiles are arranged up and down according to this picture: 1 down 2 up 3 times
4. When installing the ridge tile, cut off the first ridge tile and install it again.
Brief introduction about the installation process of synthetic resin tile products

5, the slanting ridge tile installation lap joint should be sawed, after the installation of the slanting ridge tile, then install the three-way tile. The fixing parts are special accessories.
When fixing, first drill with electric drill, the hole diameter is 2mm larger than the hook screw. The self-tapping screw is recommended to use 5.5mm diameter.

Brief introduction about the installation process of synthetic resin tile products

Comments

Popular Posts